20200131_정지훈교수님_홍보자료

IEEE Transactions on Industrial Electronics (2-yr IF: 7.050, 5-yr IF: 7.623, 5.00%, L1) Condition: Accepted

Activities January 31, 2020

Journal title: IEEE Transactions on Industrial Electronics (2-yr IF: 7.050, 5-yr IF: 7.623, 5.00%, L1)

Condition: Accepted

Article title: Effective Magnetic Component Design of Three Phase Dual Active Bridge Converter for LVDC Distribution System

Authors: Hyun-Jun Choi, Bong-Gyo Seo, Myung-Hyo Ryu,  Young-Pyo Cho, and Jee-Hoon Jung*

Abstract

To improve the power conversion efficiency of a three-phase dual active bridge (3P-DAB) converter for LVDC distribution systems, a practical design methodology is proposed. Commonly, the 3P-DAB converter is designed by only specification such as the rated power, input/output voltage, and frequency. However, using the conventional design method, the efficiency is low under heavy load conditions due to the high conduction loss. In this paper, based on the practical power loss analysis, the effective design methodology of the coupling inductance in the 3P-DAB converter is proposed, focusing on power conversion efficiency. It can mitigate the drawbacks of the common design by reducing the peak and RMS phase current and the IGBTs’ turn-off current. Experimental results verify the validity of the proposed design methodology and controller using a 25 kW prototype 3P-DAB converter.